Apple's cable is rated higher than most other USB-C cables you can buy, supporting Thunderbolt 4, USB 4, 40GB/s, and 100 W of power. Still, you might wonder how different a lower-rated, much-lower To set up a docking station in this case, you’ll connect one end of the cable to your laptop’s USB-C or Thunderbolt 3 port, and the other side to the USB-C input on your docking station. You’ll need to make sure to connect the cable to the docking station’s input, not another USB-C port. The input should be labeled as such. Follow the steps provided in this article to boot to an external device using USB TYPE-C connection for XPS, Precision and Latitude portable systems. Cannot boot to external USB-C Connected device. XPS, Precision and Latitude users may report they are unable to boot to externally connected USB Type-C devices. Thunderbolt cables, like the USB-C cables on which they’re based, have another big plus: They’re reversible, flexible, and easy to plug in. If you’ve ever fumbled around the back of a Because the standard power brick is rated for 150W, the USB-C standard would only provide 2/3 of the required power, so even an eGPU that can deliver 100W over the USB-C/Thunderbolt connection would be inadequate. One eGPU (the AkiTiO Node Pro) offers two USB-C/Thunderbolt ports that can supply 60W each. It just so happens it can use USB-C cables and plugs. Thunderbolt 4 ports are compatible with many connection standards, including previous versions of Thunderbolt™, USB, DisplayPort, and PCle To use a MacBook and iMac in target display mode, for example, you need a dedicated Thunderbolt 2 cable – not just a Mini DisplayPort cable. Similar to how all Thunderbolt 3 cables use the USB-C connector but not vice versa, all Thunderbolt 2 cables use the Mini DisplayPort connector, but not the other way around. You can use a Thunderbolt cable to charge USB-C devices, too. Apple ships a USB-C Charge Cable with the newest iPhones but Mac users need to buy a Thunderbolt cable to connect to a docking station You're not going to find a Thunderbolt 3 to Thunderbolt 2 cable as an adapter is required to connect to legacy devices. One of the (major) differentiators between Thunderbolt 1/2 and Thunderbolt 3 is that Thunderbolt 1/2 required the cable to be active (it required power to operate) whereas Thunderbolt 3 can use standard USB Type C cables (it's passive) 1. All USB-C cables will work as Thunderbolt 3 cables as long as they are good quality jvqYqjD.